Chat with us, powered by LiveChat
Clarke Distribution
Your Cart

Automotive Tools

Automotive Tools
Brand: Clarke
A comprehensive kit of adaptors and fittings for modern Schrader test port fuel injection systems. Each component is fitted with a safety valve and quick coupling system to prevent inadvertent discharge of fuel under pressure. Kit comes supplied with large high pressure gauge reading 0-100psi and 0-..
€91.34
(Ex VAT)€74.26
Brand: Clarke
Designed to assist with the service and repair of multi-valve petrol and diesel engines with deep seated valves. This universal model features unique dual cam action, parallel lift and automatic locking.FeaturesJaw capacity: 45 - 270mmThroat clearance: 160mmReversible jaw adaptors: 16 & 20mmWeight: ..
€72.82
(Ex VAT)€59.20
Brand: Clarke
The CHT719 is a simple to use two way, three jaw oil filter wrench manufactured from durable carbon steel and is made specifically to be used with oil filters ranging from 65-120mm. Used with all manufacturers fitted with compatible oil filters, this is a real time and effort saver, a great addition..
€13.46
(Ex VAT)€10.94
Brand: Clarke
For the removal of stubborn "spin-on" oil filtersFeaturesHigh strength carbon steel with satin finishDriven by a 3/8" or 1/2" square drive tool or 21mm wrench (adaptor included)Claws grip tighter as more torque is appliedLarge gear teeth for durabilityJaw opening adjustable from 65-120mmTextured cla..
€12.66
(Ex VAT)€10.30
Brand: Clarke
FeaturesArticulated action allows removal of oil filters with limited accessNo spanner requiredBand automatically tightens on the filterRubber covered handle improves grip..
€7.92
(Ex VAT)€6.44
Brand: Clarke
This easy to use ball joint remover features a hardened steel drive bolt for increased power and thanks to it's low profile design, is ideal for use in tight, hard to access areas.FeaturesHardened steel drive bolt for increased powerEasy to useWeight:450g..
€12.66
(Ex VAT)€10.30
Brand: Clarke
This metal oil can has a pump action and flexible spout with brass fittings...
€6.33
(Ex VAT)€5.15
Brand: Clarke
This metal oil can has a pump action and flexible spout with brass fittings...
€7.92
(Ex VAT)€6.44
Brand: Clarke
An oil can is an essential in any workshop or garage, for maintenance of expensive tools and equipment. This model has a flexible spout and pump action, to get the oil where it's needed...
€9.50
(Ex VAT)€7.72
Brand: Clarke
Set designed to aid reshaping metalFeaturesIncludes three fibreglass-handled hammers with drop-forged headsFeatures four drop-forged dolliesSupplied in moulded case..
€91.15
(Ex VAT)€74.11
Brand: Clarke
This 7pc panel beating set with hickory shafts includes:Features3 genuine hickory shafted hammers with drop forged heads4 polished drop forged steel dolliesSupplied in tough moulded case..
€96.85
(Ex VAT)€78.74
Brand: Clarke
A solidly made slide hammer kit so often effective as a single sided approach to the task of removing dents in vehicle bodywork. A few well targeted blows may well prevent the need for more expensive remedial treatmentFeatures9 piece kit designed to deal with most bodywork configurations..
€94.89
(Ex VAT)€77.14
Brand: Clarke
Convenient double ended tool for use on left or right handed rear calliper pistons.FeaturesIncludes 3/8” square drive multipurpose adaptorDesigned for use on popular European carsStrong steel constructionIncludes 3/8” square drive multipurpose adaptor..
€56.99
(Ex VAT)€46.33
Brand: Clarke
Designed for removing damaged, cross threaded or jammed Torx® fittings.FeaturesManufactured from S2 steel for increased hardness7 x ¼” hex drive extractors: E10,E15,E20,E25,E27,E30,E40Supplied in a convenient flip lid box..
€12.76
(Ex VAT)€10.37
Brand: Clarke
FeaturesManufactured from S2 steel for increased hardnessIncludes a ½” square drive to 10mm hex bit adaptor7 x ¼” hex drive extractors: E10,E15,E20,E25,E27,E30,E403 x 10mm hex drive extractors: E45,E50,E55Supplied in a convenient box..
€30.08
(Ex VAT)€24.45
Brand: Clarke
Convenient brake caliper piston rewind tool with reaction plate and double sided adaptor. For use on most European and Japanese cars with right handed threadFeaturesRH drive rewind toolAdaptor 1 = 22mm PCD, 6mm dia pinAdaptor 2 = 32.5mm PCD, 6mm dia pinReaction plate and double sided adaptor for use..
€33.18
(Ex VAT)€26.98
Brand: Clarke
This 6 Piece Set is supplied with the following sockets:Features3/8” (F) – 1/4” (M), 1/4” (F) – 3/8” (M), 1/2” (F) – 3/8” (M), 3/8” (F) – 1/2” (M), 3/4” (F) – 1/2” (M), 1/2” (F), – 3/4” (M)..
€20.80
(Ex VAT)€16.91
Brand: Clarke
Heavy duty Chrome Vanadium steel breaker bar with a high Chrome plated finish. Great for use on extra tight nuts.FeaturesBlack anodised steel 3/8” square driveReplaceable drive head joint with spring loaded ball bearing350mm (14”) slim style bar lengthWeight 0.5kg..
€18.20
(Ex VAT)€14.80
Showing 73 to 90 of 92 (6 Pages)